Planning Zone Finder

Test the opportunity before you commit

A short strategy discussion will tell you whether a site is worth investigating further, and what it would take to find out.

The finder is the first step. Each step after it narrows a site down to a use that is permissible, in demand and feasible.

From zone check to development decision​

  • Step 1 Free Planning Zone Finder

    Find which zones allow your proposed use and the conditions attached.

    Use the Planning Zone Finder

  • Step 2 PPC Urban Data Hub

    Explore demographic trends, existing services, supply and demand for childcare, aged care, SDA and schools.

    Open the Data Hub

  • Step 3 Planning & market assessment

    Test the site’s opportunities, constraints, risks and commercial potential.

    Market Assessments

  • Step 4 Development strategy & planning permit

    Take the preferred option through feasibility, design and approval.

    Planning Permits

Every property in Victoria sits in one zone. The zone sets which uses are allowed, which need a permit, and which are prohibited.

What the zone families mean​

  • Residential zones

    Cl 32 · NRZ GRZ RGZ HCTZ MUZ TZ LDRZ

    Housing first. NRZ protects neighbourhood character; GRZ, RGZ and HCTZ allow progressively more intensive housing; MUZ mixes homes with shops and offices. Non-residential uses such as medical centres or places of worship are tightly conditioned.

  • Commercial zones

    Cl 34 · C1Z C2Z C3Z

    Retail, offices and services. C1Z also supports housing above ground floor; C2Z suits bulky goods and light industry and prohibits most accommodation; C3Z mixes creative industry, offices and limited housing.

  • Industrial zones

    Cl 33 · IN1Z IN2Z IN3Z

    Manufacturing, warehousing and employment. Accommodation is prohibited except a caretaker’s house; buffer distances under Clause 53.10 matter.

  • Rural zones

    Cl 35 · FZ RAZ RCZ GWZ GWAZ RLZ

    Agriculture and landscape protection. Dwellings often depend on minimum lot sizes in the schedule; many urban uses are prohibited.

  • Public land zones

    Cl 36 · PUZ PPRZ PCRZ TRZ

    Land owned or managed by public authorities. Most uses are allowed only when carried out by or for the public land manager.

  • Special purpose zones

    Cl 37 · SUZ CDZ ACZ UGZ PRZ CCZ DZ PDZ PZ UFZ

    Site- or precinct-specific controls. For most of these, the council’s schedule sets the table of uses, so the schedule must be read.

Q&A Section

Frequently Asked Questions

  • Does this tool tell me the zone of my property?

    No. It tells you which zones allow a land use. To find your property’s zone and schedule number, search the address on PPC Urban’s free Data Hub map (linked at the top of this page). Then choose that zone under “My property’s zone”.

  • If the result says no permit is required, can I go ahead without a planning permit?

    Not necessarily. The result covers the use of land under the zone only. Constructing or altering buildings, overlays such as a Heritage or Design and Development Overlay, the zone schedule, and particular provisions such as car parking (Clause 52.06) can each require a permit.

  • What is the difference between Section 1, Section 2 and Section 3?

    Every zone has a table of uses. Section 1 uses need no permit (sometimes only if conditions are met), Section 2 uses need a planning permit, and Section 3 uses are prohibited. If a Section 1 condition is not met, the use usually needs a permit; if a Section 2 condition is not met, the use is usually prohibited.

  • What is a zone schedule and why does it matter?

    Each council can attach a schedule to a zone, shown on maps as a number such as GRZ1 or IN1Z2. Schedules set local figures such as maximum office floor area or minimum lot size, and for some zones (such as SUZ, CDZ and ACZ) they set the whole table of uses. Results marked “Schedule check” depend on the schedule for your site.

  • What does “Nested uses vary” mean?

    Land use terms are nested under Clause 73.03. For example, Dwelling and Community care accommodation sit inside Accommodation. A zone can treat a nested use differently from its parent term, so the finder lists those uses and lets you select the specific one.

  • How current is the information?

    The tables of uses were checked against the live Victoria Planning Provisions on 16 October 2026 (latest amendment VC306, 15 October 2026). Each result shows the clause and the amendment date of its table of uses. Planning schemes change often, so confirm the current controls before relying on a result.

  • Can PPC Urban check my site?

    Yes. A Preliminary Planning Assessment confirms the permissible uses for your property, reviews the schedule, overlays and particular provisions, and recommends the approval pathway. Book a Data Hub Demo.

About this information. Results come from the tables of uses in Clauses 32 to 37 of the Victoria Planning Provisions and the land use terms and nesting in Clause 73.03. The tables of uses were checked against the live planning scheme on 16 October 2026 (latest amendment VC306, 15 October 2026; that amendment did not change any table of uses). Each result shows the clause and amendment it comes from.

Not covered. Zone schedules (except where noted), overlays, particular provisions such as Clauses 52.06, 52.22 and 53.10, Clause 62.01 exemptions, existing use rights, buildings and works permits, restrictive covenants and section 173 agreements. Conditions are condensed from the clause text; read the clause for the exact wording.

Disclaimer. This tool gives preliminary, general planning information only. It is not a statutory planning assessment, legal advice or a substitute for advice from a qualified town planner or the responsible authority. PPC Urban accepts no liability for decisions made in reliance on it. Before buying, designing or lodging an application, confirm the controls for your site with the council or contact PPC Urban.